American access system ADV-1000 Guide de l'utilisateur télécharger pdf (Page 291)

RS-232 Port (single panel) Configuration - Port

Panel Defaults

I/O Poll Interval: 60 seconds (default); set the

frequency that a signal is sent to the panel to verify

communication and check the panel’s input and

output states.

Panel CMD Retry Count: 3 (default); set the

number of times a command will be resent if the

panel does not respond to the command.

Panel CMD Time Out: 5 seconds (default); set the

amount of time allowed for sending a command

before timing out.

Port: Select the port that the panel is connected to.

Bits per second: Select the communication rate.

Data Bits: 8 (default).

Parity: 1 (default).

Stop Bits: None (default).

IP-Address or Node Name - active if TCP/IP

Connection is selected as the Port.

Pas de commentaire

American access system ADV-1000 Guide de l'utilisateur Page 291